超声波处理对3003铸轧板坯组织性能的影响
Effect of Ultrasonic Treatment on Microstructure and Properties of 3003 Aluminum Plate Produced By Continuous Casting
夏晨希, 胡仕成, 田明华
点击:5233次 下载:0次
作者单位:中南大学机电工程学院 现代复杂装备设计与极端制造教育部重点实验室, 湖南 长沙 410083
中文关键字:连续铸轧; 超声; 显微组织; 成分偏析; 力学性能
英文关键字:continuous casting; ultrasonic; microstructure; segregation; mechanical properties
中文摘要:实验研究了在 3003铝合金板坯连续铸轧过程中于前箱施加超声,给其带坯的显微组织、微观形貌、中心层偏析和力学性能的影响。实验结果显示,在前箱施加超声振动后,带坯的晶粒细化程度与添加细化剂效果相同,但晶粒形状和分布更均匀,带坯的中心层偏析程度大幅减弱,综合力学性能得到了提升。
英文摘要:By exerting ultrasound in the former tank during continuous casting process of 3003 aluminum plate, the effects of ultrasound on the microstructure, morphology, central layer segregation and mechanical properties of the plate were studied. The results indicate that under the condition of exerting ultrasound in the former tank,the level of grain refinement is the same as the plate adding refiner, but the grain's shape and distribution is more uniform, the segregation of the central layer is significantly reduced, and the mechanical properties are increased.