网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


Al对Nb / Nb5 Si3复合材料高温抗氧化性能的影响
Effect of Al on Antioxidant Performance at High-temperature of Nb / Nb5Si3 Composite
赵 璐, 龙文元, 尧军平, 张 磊
点击:3461次 下载:0次
作者单位:(南昌航空大学 航空制造工程学院, 江西 南昌 330063)
中文关键字:放电等离子烧结; Nb/Nb5Si3原位复合材料; 高温氧化
英文关键字:SPS; Nb/Nb5Si3 in-situ composite; high temperature oxidation
中文摘要:采用放电等离子烧结制备Nb-20Si、Nb-20Si-10Al和Nb-20Si-15Al合金,并研究其在800 ℃的氧化行为,利用XRD和SEM分别对合金氧化膜的相组成及形貌进行了观察和分析。结果表明,在Nb-20Si-15Al的氧化膜中存在玻璃态SiO2,使氧化膜平整,抑制了氧的扩散。
英文摘要:Nb-20Si, Nb-20Si-10Al and Nb-20Si-15Al alloys were prepared by spark plasma sintering(SPS). The antioxidant performance of the alloys at 800 ℃ were studied. The phase composition and morphology of the composite were studied by XRD. The morphology of oxide scales was observed by SEM. The results show that there are SiO2 at molten state in the oxide scale of Nb-20Si-15Al, which can make the scale smooth and restrain the diffusion oxygen.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发