网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


Ca含量对Mg-5Zn-2Al合金铸态组织和性能的影响
Effect of Ca Addition on Microstructure and Properties of Mg-5Zn-2Al Magnesium Alloy
任林昌1, 阎峰云1,2, 周鹏飞2, 耿海涛
点击:3334次 下载:0次
作者单位:(1.兰州理工大学 有色金属合金及加工教育部重点实验室,甘肃 兰州 730050; 2.兰州理工大学 甘肃省有色金属新材料省部共建国家重点实验室,甘肃 兰州 730050)
中文关键字:Mg-5Zn-2Al; Ca; 细化
英文关键字:Mg-5Zn-2Al; calcium; refining
中文摘要: 采用光学显微镜、XRD和SEM等手段,研究了Ca对Mg-5Zn-2Al合金铸态显微组织和力学性能的影响。结果表明: Ca的加入对Mg-5Zn-2Al合金铸态的晶粒能够显著地细化。合金的抗拉强度和伸长率均呈现先上升后下降的变化趋势。该合金中加入0.2wt% Ca细化效果最明显,其合金铸态时的抗拉强度和伸长率分别为为233 MPa和13.33%。
英文摘要:The effects of calcium addition on the microstructure and mechanical properties of Mg-5Zn-2Al alloy were investigeted by optical microscope, XRD and SEM etc. The results show that, adding calcium can significantly refine Mg-5Zn-2Al magnesium alloy's grain size, and the tensile strength and elongation first rises then declines. The refining effect of the alloy with 0.2% Ca is most obvious, its as-cast tensile strength and elongation rate is 233 MPa and l3.33%, respectively.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发