网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


加氢压缩机活塞杆断裂失效分析
Failure Analysis on Fracture of Piston Rod for Hydrogenation Compressor
丁 毅, 许万剑, 陆晓峰, 马立群
点击:2808次 下载:0次
作者单位:(南京工业大学 材料科学与工程学院, 江苏 南京 210009)
中文关键字:活塞杆; 疲劳断裂; 脆性夹杂物; 甲烷气孔
英文关键字:piston rod; fatigue fracture; brittle inclusions; methane bubble
中文摘要:通过宏观微观断口分析、化学成分分析、金相显微组织分析等手段,对断裂的活塞杆进行了失效分析。结果表明,活塞杆断裂属于疲劳断裂,活塞杆组织中存在的脆性夹杂物和渗氢所形成的甲烷气孔等缺陷,降低了活塞杆的疲劳强度,促进了活塞杆的疲劳断裂过程。
英文摘要:The failure analysis of piston rod for hydrogenation compressor was done by means of macroscopic and microscopic fracture analysis, chemical composition analysis and microstructure analysis. The results indicate that the fracture of the piston rod is fatigue fracture. The existing of brittle inclusions and methane bubbles caused by hydrogenation decreases the fatigue strength of the piston rod and promotes the fatigue fracture process.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发