网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


锂离子电池正极材料Li3V2(PO4)3的合成与性能研究
Study on Synthesis and Electrochemical Characteristics of Li-ion Battery Cathode Material Li3V2(PO4)3
邵重阳, 许云华, 王 娟, 周志斌
点击:3215次 下载:0次
作者单位:(西安建筑科技大学 机电工程学院, 陕西 西安 710055
中文关键字:磷酸钒锂; 正极材料; 电化学性能
英文关键字:lithium vanadium phosphate [Li3V2(PO4)3]; cathode material; electro-chemical properties
中文摘要:

以LiAc·2H2O、V2O5、NH4H2PO4、蔗糖和乙二醇为原料,采用液相多元醇法合成了锂离子电池正极材料Li3V2(PO4)3,研究了烧结温度对产物电化学性能的影响。XRD、SEM和充放电测试表明:在800 ℃下烧结10 h合成的样品为单斜晶系;在0.1C、3.0~4.3 V下充放电的首次放电比容量为126 mAh·g-1,第20次循环的比容量为120 mAh·g-1。

英文摘要:Li-ion battery cathode  material  Li3V2(PO4)3 was synthesized by liquid phase polyol method using LiAc·2H2O, V2O5, NH4H2PO4,  sucrose and ethylene glycol as raw material. The effects of sintering temperature on the electro-chemical properties of the sample were studied. The XRD, SEM and charge-discharge tests show that the sample sintered at 800 ℃ for 10 h has a single monoclinic structure, when charge-discharge at 0.1C and the voltage of 3.0~4.3V, its initial specific discharge capacity is 126 mAh·g-1, the specific capacity at the 20 th cycle is 120 mAh·g-1.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发