网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


低碳高强钢奥氏体晶粒粗化对高温流变行为的影响
Effect of Austenite Grain Coarsening on Rheological Behavior of Low-carbon High-strength Steel at High Temperature
张长利, 沈厚发, 柳百成
点击:5539次 下载:0次
作者单位:(清华大学 机械工程系, 北京 100084)
中文关键字:低碳高强钢; 流变行为; 奥氏体晶粒粗化; 本构方程
英文关键字:low-carbon high-strength steel; rheological behavior; austenite grain coarsening; constitutive equation
中文摘要:采用Gleeble-1500D试验机研究低碳高强钢在高温(大于1200 ℃)及低变形速率(小于10-2 s-1)条件下的拉伸流变行为。采用的拉伸试验包括单拉伸试验及双拉伸试验。实验钢在高温条件下,铸态组织奥氏体化,并且随温度升高及保温时间延长,奥氏体晶粒明显粗化,对高温流变行为产生较大影响。考虑实验钢奥氏体晶粒粗化现象的本构方程能够较好吻合实验测量的应力-应变数据。
英文摘要:Through  single  tension  tests  and  double  tension  tests  at  high   temperature   by   Gleeble-1500D   thermo-
mechanical  simulator,  the  rheological behavior of low-carbon high-strength steel was investigated at high temperature (>1200 ℃) and low strain rates (lower than 10-2 s-1). At high temperature, the austenization of as-cast microstructure of the studied steel happens, and austenite grain size increases with the increase of temperature and time. Such microstructure change has a profound effect on the rheological behavior of the studied steel at high temperature. A constitutive equation that takes into account such effect can lead to a good agreement between the calculated and the measured stress-strain curves.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发